Free Classifieds at USAOnlineClassifieds.com - View Item Content by ID 931877

USAOnlineClassifieds > Business Opportunities > Investment > Item ID 931877

Item ID 931877 in Category: Business Opportunities - Investment

Cannot view this item. It could be pending, expired or deleted.
Below item is randomly selected from the same category and may have similar content.

Led Street Light Housing Factory Introduces The Parameter Requirements Of Led Flood Lights


Led Street Light Housing Factory introduces the relevant parameters of LED flood light.

1. The CRI of LED flood light: the higher the CRI, the more expensive, the higher the CRI, the lower the luminous flux. Generally, high-CRI LED floodlights must be used in important occasions, and the current range is generally between 75-85.

2. The luminous flux of the LED flood light: the amount of light emitted per unit time becomes the luminous flux, the unit is lumens (lm), and the data is measured by the integrating sphere. This is a parameter that customers are very concerned about. The color temperature selection of LED flood light: the color temperature is generally between 2700-3500K is warm white light, 4000-5500K is natural white light, and 6000-7000K is positive white light. The specific color temperature used depends on the applicable place. Power supply: LED constant current power supply, the higher the current, the higher the temperature, so the general real engineer will choose the appropriate current adjustment, so that the temperature of the lamp is controlled within 60 degrees.

3. LED flood light driving power, light source chip, housing and production process are the main factors affecting product quality. The power supply is like the heart of the lamp, which determines the life of the projector. The better the chip quality, the brighter the lamp. The quality of the power supply and chip of the LED flood light can be determined by its brand. The quality of the LED floodlight housing affects the heat dissipation, waterproof and dustproof degree of the product. Outdoor high-power LED floodlights should have a waterproof and dustproof rating above IP65. For the production process, you can check whether the appearance of the LED flood light is fine, and only a good process can produce a good product.

Through the above introduction, High Quality Street Light Housing Manufacturers hopes that you can simply refer to the content of this article in future use.

https://www.cnledstreetlight.com/

Related Link: Click here to visit item owner's website (0 hit)

Target State: Kentucky
Target City : All Cities
Last Update : Mar 03, 2021 4:28 AM
Number of Views: 2
Item  Owner  : ninghaiyuchen
Contact Email: (None)
Contact Phone: (None)

Friendly reminder: Click here to read some tips.
USAOnlineClassifieds > Business Opportunities > Investment > Item ID 931877
 © 2021 USAOnlineClassifieds.com
2021-03-03 (1.003 sec)