Daily maintenance of China Polishing Machine
The key to operating the China Polishing Machine is to remove the damaged layer on the surface of the pipe with the maximum polishing rate to achieve the purpose of polishing. Using a coarser abrasive, the damaged layer can be quickly removed, using a finer abrasive, the polished damage layer is shallower, but the polishing efficiency tends to be lower.
China Polishing Machine polishing a few tube motors is very hot. If it is not hot before use, first determine whether the polishing machine is overloaded. If a small polishing machine is used to polish long steel pipes, and the bracket does not have a guide wheel, the steel pipe is The resistance to the front walking will be very large, which increases the running load of the motor. Polishing several tube motors will be hot. Therefore, when polishing a relatively long steel tube, it is necessary to install a guide wheel on the bracket.
While using the China Polishing Machine, don't forget to do routine maintenance. Pay attention to the following points: Polishing stainless steel has a long working time, and the abrasive and motor will be easy to be hot, so that the polishing machine can rest after proper rest. Regularly clean the dust on the motor. The heat dissipation of the motor is mainly caused by the fan. If the dust is blocked, it will affect the heat dissipation of the fan and cause the motor to burn.
information about china polishing machine : https://www.zhongyun-machine.com
|Related Link: Click here to visit item owner's website (0 hit)|
|Target State: Colorado|
Target City : Huzhou
Last Update : Jun 11, 2019
Number of Views: 17
|Item Owner : machineunique|
Contact Phone: (None)
|Friendly reminder: Click here to read some tips.|