Led Flood light Factory Tells You The Area Used By Led Floodlights
LED floodlights, also known as spotlights, projection lights, spotlights, etc., are mainly used for the construction of decorative lighting, as well as commercial space lighting, decorative parts are heavy, the appearance is round and square, because it is usually the reason to consider heat dissipation, so There are still some differences between shapes and traditional floodlights. Follow the characteristics of the Led Flood Light Factory .
First, LED floodlight features:
LED floodlights commonly used in the market are basically 1W high-power LEDs, and a few companies have chosen 3W or higher-power LEDs for their good heat dissipation technology. Suitable for large occasional lighting, construction and other lighting.
What other things do you need to pay attention to?
1. High-purity aluminum reflector, the most accurate beam, the best reflection.
2. Symmetric narrow angle, wide angle and asymmetric light distribution system.
3, the rear open type of replacement bulb, the protection is simple.
As shown in Figure 4, the luminaire is attached with a scale plate to facilitate adjustment of the viewing point.
LED floodlights are controlled by a built-in microchip. In small-scale engineering applications, they can be used without manipulators and can perform dynamic functions such as mutations, jumps, color glare, random flares and sudden changes, as well as DMX control. Completion of chasing, scanning, etc. At present, the main application sites may be: single building, interior and exterior lighting of buildings, indoor partial lighting, landscape lighting beautification, billboard lighting, medical civilization and other special facilities lighting, bars, dance halls, entertainment venues, etc. .
Second, what is the LED floodlight?
LED floodlights are point sources that can be illuminated uniformly in all directions. The illuminance can be adjusted arbitrarily and is represented by a regular octahedron in the scene. Floodlights are the most widely used source in image design, and standard floodlights are used to illuminate the entire scene. Factory. Lights can be used to produce good results. Floodlights are the most widely used source of light in motion diagrams. Scenes can be coordinated by multiple floodlights to provide better results. It is best to illuminate the object evenly from a specific point in all directions, preferably for simulating bulbs and candles. Floodlights can be placed anywhere in the scene. For example, it can be placed outside the size of the merma or placed inside the object. It is common to use many different colors of floodlights in the scene. These floodlights project darkness and mix them on the model. Due to the large-scale exposure of floodlights, the lighting effect of floodlights is very predictable, and such lamps have many auxiliary uses.
It should be noted that the floodlights cannot be built too much, otherwise the motion map will appear flat and stagnant. Therefore, in the production of ordinary motion diagrams, more attention is paid to the influence of lighting parameters and layout on the light perception of the entire motion scene, to establish more experiences, and to master the lighting techniques.
information about Led Flood Light Factory : https://www.cpclighting.com/
|Related Link: Click here to visit item owner's website (0 hit)|
|Target State: Indiana|
Target City : Ningbo
Last Update : Apr 25, 2019
Number of Views: 38
|Item Owner : Cpcbeta|
Contact Phone: (None)
|Friendly reminder: Click here to read some tips.|